 |
 
| Back
to Shimano Spinning menu... |
| 
|
Shimano Sahara FB
Details below...
$59.99
each |
Model |
Bearings |
Gear
Ratio |
Line
Cap (lb/yd) |
Wt.
in oz. |
|
SH750FB |
3 |
4.7:1 |
2/240, 4/120,
6/95 |
6.9 |
|
SH1500FB |
3 |
6.2:1 |
4/170, 6/130,
8/90 |
9.5 |
|
| SH2500FB |
3 |
6.2:1 |
6/200, 8/140,
10/120 |
9.7 |
|
| SH4000FB |
3 |
6.0:1 |
8/240, 10/200,
12/160 |
12.1 |
|
|
| •
Aluminum Frame (graphite on 750).
* Graphite Sideplate
* Graphite Rotor
* Cold Forged Aluminum Spool
provides increased strength and durability.
* Spare Cold Forged Aluminum Spool
* Paddle Handle Grips (except
on model 4000 which is Flat T Type).
* S-Concept (only on model
750) represents Shimano's initial philosophy
on which many of our spinning reels have
been designed. The three basic ideas that
are inherent in the S-Concept are Smooth,
Silent and Strong.
* Slow Oscillation lays
the line in a parallel pattern for excellent
castability and control (only 750 size).
* Maintenance Port a sealed
plug that can be removed using a screwdriver
to easily lubricate the drivetrain without
disassembling the reel (only 750 size).
* S-Arm Cam a protruding
surface on the bail arm keeps slack line
in contact with the line roller to reduce
the chance of tangles and line cuts (only
750 size).
* Fluidrive II uses the
successes of Fluidrive, but also uses a
polishing process to increase tooth contact
for increased efficiency.
* A-RB (Anti-Rust Bearings)
are specially treated stainless steel ball
bearings that are at least 10 times more
corrosion resistant than standard stainless
steel ball bearings.
* Super Stopper II is a
one-way roller bearing that eliminates backplay
for solid hooksets, yet can be turned on
or off to allow back-reeling.
* Ported Handle Shank (only
on model 750) reduces the overall weight
of the reel.
* Dyna-Balance Similar
to balancing a tire, we use counterbalancing
techniques in the rotor to eliminate wobble
during the retrieve.
* Power Roller II is an
oversized line roller that reduces twist
from casting and retrieving and is enhanced
with a tapered area on the support to help
line get onto the roller.
* Floating Shaft By using
a bearing or bushing, friction is reduced
between the pinion gear and spool shaft
for increased smoothness and durability.
* Metal Series Metal frames
keep moving parts in precise alignment for
increased efficiency and durability (excluding
750 models).
|
Delo's
Tournament Fishing Tackle
© 2006 |
